Central California Implement Co.

 

 

 

 

 

 

 

 

A.        Thickness of material                                        __________                __________

 

B.         Width of material                                              __________                __________

 

C.        Length of material                                             __________                __________

 

D.        Distance to center of 1^st hole                             __________                __________

 

E.         Centers from 1^st hole to 2^nd hole                        __________                __________

 

F.         Centers from 2^nd hole to 3^rd hole                       __________                __________

 

G.        Centers from 3^rd hole to 4^th hole                        __________                __________

 

H.        Bolt size                                                           __________                __________

 

I.          Distance from hole to top                                  __________                __________

 

J.          Distance from hole to bottom                            __________                __________

 

K.        Plow bolts or carriage bolts                               __________                __________

 

L.         Top or bottom countersink                                __________                __________

 

 

Depending on the length of the blade, there may be several more hole centers like E, F, and G. Most of the time these hole centers are the same, but you need to check each hole center because in some homemade blades each hole center my differ slightly. It is very important to make your measurements accurate.